Important Notes; Manufacturer´s Declaration; Warranty; Rights And Trademarks - Elcon nect next BIG 10 Kurzbedienungsanleitung

5 Important notes

5.1
The manufacturer confirms that the ELCONnect next BIG 10 Bridge has been designed for
the transfer of data information and, subject to its proper usage, complies with the relevant
safety standards and the applicable EMC requirements.
5.2
This documentation compiled by ELCON Systemtechnik GmbH is based on best available
technology. However, although applying due diligence, it is impossible to exclude all mis-
takes and technical inaccuracies. In view of the rapid technological progress, ELCON re-
serves the right to modifications and improvements without prior notification. For this reason
ELCON assumes no liability for the content of this document.
Further, ELCON shall not be responsible for any loss or incorrect use of information or data
which may result from using this document. In addition, ELCON cannot be held liable for
damages, whether direct or indirect (including, but not limited to, financial losses, delayed
business transactions, disruption of business or similar consequences), incurred as a result of
improper use of the equipment.
This documentation has been made to explain the functionality of the BIG 10. It describes
installation and application of the device and its supplementary equipment, drivers and soft-
ware tools (if required). Detailed information, addressing client-specific solutions, can be tak-
en from the relevant user manual.
Further information on the operation of peripheral equipment and installations, in particular
about the installation of cable TV networks, computer hardware and the available access
technologies, can be received from your telecommunications network operator or Internet
Service Provider, or the respective user manuals.
Note: This documentation may describe performance features which cannot be used in the
specific application case.
5.3
With respect to the information contained in this documentation ELCON provides no warran-
ties as for the non-existence of industrial property rights (trademarks, patents, utility models,
etc.). Generally used trademarks, trade names, company and product names are subject to the
respective trademark, patent, utility model or registered design rights.
The information in this document must not be copied, neither in full nor in extracts, translat-
ed, reprinted or transferred in any other way.
The purchase of software and equipment shall be governed by the General Terms and Condi-
tions for the Sale and Supply of Products and Services and the License Conditions of ELCON
Systemtechnik GmbH.
40
Downloaded from www.Manualslib.com
Manufacturer´s declaration

Warranty

Rights and trademarks

manuals search engine
BIG 10 Bridge
Version: 2013/04/15