MA lighting MA 4Port Node Anleitung Seite 37

Display
The MA 4Port Node display will only show the most important settings. For configuring a node, you have to use a
grandMA console or the „onPC" software.
after switching the device on, the display will show this menu:
Name of MA4Port Nodes
DMX Output
IP – Address
Mode
Number of Session
Configuration of DMX-Ports (A, B, C,D)
Univers
Downloaded from www.Manualslib.com
e.g. support4Node
e.g. 30 = frequency of DMX-output in Hz; max. 30Hz possible
e.g..192.168.0.116
MANET2 or ARTNET
e.g. Session 3 - MA 4PORT Node is part of session 3
e.g. Session 0 = no session
e.g. Session 3 + areas OUT grey highlighted = no active session
In –
OUT – this port sends DMX
Flashing frequency of the green area corresponds to the
refresh quote between MA 4Port Node and PC/console
OFF – this port is off
Univers number of respective ports 1 - 256
manuals search engine
this port receives DMX
MA 4Port Node
Data
Transport
Safety
instructions
Safety and
environmet
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
36