Temperature Setting And Monitoring System; Cabinet Types; Operating The Temperature Controller; Thermostat Temperature Controller - AHT NUCAB Serie Betriebsanleitung

NOTE
cial hanging baskets ( see Fig. 1)
Fig. 1: Internal view of D-Ice cabinets with baskets
CAUTION
Risk of injury due to material breakage.
Cuts to the body and damage to the
cabinet.
Do not climb on top of or into the cabi-
net. Do not place loads on the lid.
Remove a broken lid from inside and
around the freezer area immediately
wearing protective gloves.
Stop using the cabinet with the broken
lid and immediately transfer all affected
products to a functioning cabinet.
NOTES
or be used as a storage space for various objects.
tion accrues and the moisture contained in the air is
frozen onto the cooling surfaces. The operator must
therefore defrost the cabinet completely manually at
regular intervals.
CAUTION
Risk of injury due to slipping.
Leaked condensation may lead to slipping.
Timely removal of the condensation that
may leak from the cabinet.
8. Temperature setting and
monitoring system
-
NOTE
for your products.
The temperature display (optional) shows a tempera-
ture inside the cabinet that does not correlate directly
with the product temperature.
On cabinets with a thermostat, the display can either
be in the form of an external thermometer on the
front wall or as an internal thermometer on the right
inside wall.
On cabinets without a temperature display, a ther-
mometer is to be placed on the highest layer of prod-
ucts. Please note, however, that this does not display
the temperature of the products but, from experience,
a slightly warmer temperature.

8.1 Cabinet types

Freezer cabinets are designed for the mode "–" (freez-
ing mode) only.
Depending on the area of use (purpose of use),
various temperature ranges are available:
Operating mode "–" freezing mode
Temperature Purpose of
range use
Standard Impulse ice cream
Optional Scooping ice cream Thermostat
("Scooping")
D-ICE D-ICE*
*D-Ice: narrow temperature range for internal temperature of
–18 °C + / –1 °C (1.4 °F to –2.2 °F)
-
9. Operating the temperature
controller

9.1 Thermostat temperature controller

The temperature controller (thermostat) is located on
the side in the ventilation grille.
Depending on the design of the cabinet model, the
setpoint for the internal temperature can be
set in the following ranges:
Temperature
controller
Thermostat
Electronic
controller
35
DE
EN
IT
FR
ES
PT
NL
DA
FI
SE
NO
SL
HR
CS
SK
PL
ET
LT
LV
HU
RU
RO
EL
TR
BG