Specifications - Makita BO5020 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Lock button
1-2. Switch trigger
2-1. Speed adjusting dial
3-1. Notches
3-2. Front grip
3-3. Screwdriver
3-4. Hole in front grip
4-1. Abrasive disc
5-1. Push button

SPECIFICATIONS

Model
Pad diameter
Abrasive disc diameter
Orbits per minute (min
Overall length
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
Vibration
The vibration total value
determined according to EN60745-2-4:
Work mode : sanding metal plate
Vibration emission (a
h
Uncertainty (K) : 1.5 m/s
All manuals and user guides at all-guides.com
Explanation of general view
5-2. Dust nozzle
6-1. Dust nozzle
6-2. Push button
7-1. Hook
7-2. Dust nozzle
7-3. Push button
7-4. Dust bag
9-1. Groove
9-2. Front fixing cardboard
-1
)
ENE052-1
ENF002-1
ENG104-1
) : 76 dB(A)
pA
ENG211-1
(tri-axial vector sum)
2
) : 3.0 m/s
2
9-3. Front side of paper dust bag
10-1. Claws
10-2. Upper part
11-1. Notch
11-2. Guide
14-1. Sponge pad
15-1. Felt pad
16-1. Wool pad
BO5020
123 mm
125 mm
12,000
288 mm
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
EC Declaration of Conformity
We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Random Orbit Sander
Model No./ Type: BO5020,BO5021
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
4
BO5021
4,000 - 12,000
1.4 kg
/II
ENG901-1
ENH101-12
as the responsible