Alarm Setting - BEARWARE 304304/20200116HK016 Bedienungsanleitung

• 12/24 hour format
• Hour
• Minute
• Year
• Month / Day format
• Month
• Day
• Time zone - Note: If you set the time zone, for example, to + 01 and the weath-
er station is actuated using the DCF-signal, then the clock displays one hour
later than the DCF-signal.
• Language setting - To set the day on the display. The following codes can be
configured and selected using the "CH/+" and "-" buttons: EN (English), RU
(Russian), NL (Dutch), IT (Italian), ES (Spanish), DE (German), FR (French)
• RC - Enable or disable the DCF signal function.
• DST - Enable or disable automatic switching to daylight saving time.
• Weather forecast - Switching the air pressure-based weather forecast on or
off.

7.2 Alarm setting

Setting the alarm
Press the "TIME SET" button to view the alarm instead of the date. Press and then
hold the "ALARM" button till the corresponding alarm time starts flashing.
You can make the desired settings using the "CH/+" and " _ " buttons. Then press
the "ALARM" button again to save the alarm setting. The alarm is activated auto-
matically after setting the alarm time.
Turning the alarm on / off
Press the "ALARM" button in time mode. An alarm symbol appears next to the
time. This means that the alarm is turned on. Press the "ALARM" button again to
turn on alarm 2. Press the button a third time to turn on both the alarms. Press
the button a fourth time to turn off the alarm. The active alarms are displayed
next to the time. If an alarm symbol is not shown on the display, then the alarm
is turned off.
English
29