Service Parameters - Seltron SCC40 Bedienungsanleitungen

SERVICE PARAMETERS

Service parameters are arranged in groups S1, S2 and S3. With service parameters it
is possible to activate or select many additional functions and adaptations of controller
performance. When you select the required parameter group in the menu, a new screen
opens:
Parameter
mark
Default
value
You modify settings by pressing the button
a new screen opens to insert the code for unlocking:
Factory set code is "0001".
Now you can modify the value of the unlocked parameter by pressing buttons
. . The setting is confirmed by pressing the button
By pressing buttons
procedure.
You exit parameter settings by pressing the button
Change of service and functional parameters must be carried out only by a
properly qualified expert.
Parameters are locked
By pressing buttons
number which you want to modify and press the but-
ton .
When the number flashes you can modify it by press-
ing buttons
button .
When the correct code is inserted, the controller un-
locks the parameters for editing and returns to the
selected group of parameters.
Return back from unlocking by pressing button
, you can move to another parameter and repeat the
29
Parameter value
MIN is the minimum possible parameter setting
MAX is the maximum possible parameter setting
Parameter description
. Because parameters are locked
and
, and confirm it by pressing
.
.
you mark the
.
,
Service settings manual