Photonic F3000 Bedienungsanleitung Seite 18

Menu
Press the rotary knob until the menu appears with the following setting options:
The menu can be exited at any time by keeping the rotary knob pressed down.
For new features please check our website or ask your local dealer.
F3000 | F5000
Menu item
SETTINGS
STARTUP
LOWER LIMIT
UPPER LIMIT
PRESET 1-10
<MAIN MENU
STROBE
LEVEL
PULSE
RATE
RUN/STOP
<MAIN MENU
SYSTEM
SHUTTER
USB MODE
STEP SIZE
FOOTSW.
FOOT DIM SPEED
PANEL LOCK
FIRMWARE
RESET SETTINGS
LCD CONTRAST
LCD BRIGHTNESS
<MAIN MENU
F5100 | F5100Endo
Menu item
SETTINGS
SHUTTER
STARTUP
STARTUP B.
STEP SIZE
LOWER LIMIT
UPPER LIMIT
PUSH
PRESET 1-10
FLASH
MODE
BRIGHTNESS
PULSE
Value range
0-100%, LAST
0-100%
0-100%
0-100%, SKIP
0-100%
0.1-5000.0ms
0.2-5000.0Hz
ACTIVE, STOPPED
LIGHT ON, LIGHT OFF The shutter function can be used
STANDARD
LEICA
1-5%
TOGGLE+DIM
TOGGLE
PUSH ON
PUSH OFF
PRESETS
DUAL KEY
1-10X
YES, NO
YES, NO, DONE
0-100%
0-100%
Value range
ON | OFF
ON | OFF | LAST
0-100% | LAST
AUTO | 1-100%
0-100%
0-100%
SHUTTER | PRESETS
SKIP | 0-100%
FREE RUN
TRIG. (DELAY)
TRIG. (PHASE)
30-100%
>10µs
Note
Brightness value after switch-on
Smallest settable value
Largest settable value
Memory presets for brightness values, this memory
preset is not used if SKIP is selected
Back to the main menu
Brightness value for the strobe function
Pulse duration
Pulse frequency
Start/Stop strobe function
Back to the main menu
Photonic protocol
Leica LAS protocol
Step size for dimming
Switch on/off with footswitch, hold footswitch down
for dimming.
Switch on/off with footswitch
Light source activated while pressed
Light source deactivated while pressed
Press to scroll through Presets
Dimming with 2 external key buttons
Dimming speed for TOGGLE+DIM and DUAL KEY
Prevents brightness control directly at the device
Version display of the firmware
Reset to factory settings
Display contrast
Display brighness
Back to the main menu
Note
The shutter function can be used
Shutter value after switch-on
Brightness value after switch-on
Step size for dimming
Smallest settable value
Largest settable value
Function of encoder when pushed
Memory presets for brightness values, this memory
preset is not used if SKIP is selected
Pulse duration