Proper Use - Kity KS55PS Originalbetriebsanleitung

1. Introduction
MANUFACTURER:
scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we wish you a pleasant and successful working expe-
rience with your new scheppach machine.
NOTE:
According to the applicable product liability law the
manufacturer of this device is not liable for damages
which arise on or in connection with this device in
case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs by third party, non authorized skilled work-
ers,
• installation and replacement of non-original spare
parts,
• improper use,
• failures of the electrical system due to the non-
compliance with the electrical specifications and the
VDE 0100, DIN 57113 / VDE 0113 regulations
RECOMMENDATIONS:
Read the entire text of the operating instructions prior
to the assembly and operation of the device.
These operating instructions are intended to make it
easier for you to get familiar with your device and uti-
lize its intended possibilities of use.
The operating instructions contain important notes on
how to work safely, properly and economically with
your machine and how to avoid dangers, save repair
costs, reduce downtime, and increase the reliability
and working life of the machine.
In addition to the safety regulations contained herein,
you must in any case comply with the applicable regu-
lations of your country with respect to the operation of
the machine.
Put the operating instructions in a clear plastic folder
to protect them from dirt and humidity, and store them
near the machine. The instructions must be read and
carefully observed by each operator prior to starting
the work. Only persons who have been trained in the
use of the machine and have been informed on the
related dangers and risks are allowed to use the ma-
chine. The required minimum age must be met.
In addition to the safety notes contained in the present
operating instructions and the special regulations of
your country, the generally recognized technical rules
for the operation of wood working machines must be
observed.
16 GB
2. Device description Fig. 1
1. Handle/hand grip
2. Front handle
3. Plunge-cut trigger
4. On/off switch
5. Base plate
6. Adjustment screw for depth of cut
7. Scale for depth of cut
8. Mitre adjustment screw
9. Mitre square
10. 90-degree adjustment screw
11. Saw blade
12. Suction nozzle
13. Motor
14. Shaft locking mechanism
15. Adjustment screw for guide rail
3. General notes
After unpacking, check all parts for any transport dam-
age. Inform the supplier immediately of any faults.
Later complaints cannot be considered.
Make sure the delivery is complete.
Before putting into operation, familiarize yourself with
the machine by carefully reading these instructions.
Use only original Scheppach accessories, wearing or
re place ment parts. You can find replacement parts at
your scheppach dealer.
When ordering, include our item number and the type
and year of construction of the machine.
In these operating instructions we have marked the
places that have to do with your safety with this sign:
m

4. Proper use

CE tested machines meet all valid EC machine
guidelines as well as all relevent guidelines for
each machine.
• The machine must only be used in technically per-
fect con dition in accordance with its designated use
and the in structions set out in the operating manual,
and only by safety-conscious persons who are fully
aware of the risks involved in oerating the machine.
Any functional dis orders, especially those affecting
the safety of the machine, sholud terefore be recti-
fied immediately.
• Any other use exceeds authorization. The manufac-
turer is not responsible for any damages resulting
from un authorized use; risk is the sole responsibility
of the operator.
• The safety, work and maintenance instructions of
the manufacturer as well as the technical data given
in the calibrations and dimensions must be adhered
to.
• Relevant accident prevention regulations and other,
gene rally recognized safety-technical rules must
also be adhered to.