Built-In Drawings; Cross Section - Gastros Switzerland InductWarm 130+ Betriebs- Und Montageanleitung

Built-in Drawings

Stone (use not recommended by Gastros), artificial stone and glass as a cover material can expand
when heated, which can cause tensions cracks.
PLEASE NOTE: It is recommended to use an immediate silicone joint for the possible extension of the
surface. Kindly see the following installation recommendations.
PLEASE NOTE: Gastros can give advice for the choice of the cover material, but assumes no liability for any
damage to the surface.

Cross Section

With immediate silicone joint (recommended by Gastros Switzerland)
3 mm immediate
Supporting Structure
Mounting Kit
Full-length cover plate without silicone joint
Supporting Structure
Unterkonstruktion
Mounting Kit
silicone joint Note guidelines for cover materials!
Cool Air
Note guidelines for cover materials!
Cool Air
Cover material (e.g. artificial stone)
Warm Air
120 mm
350 mm
450 mm
Cover material (e.g. glass, wood)
Warm Air
120 mm
350 mm
450 mm
100 mm
Cool Air
100 mm
Cool Air
27