Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
AIM storage capacity
– approx. 3 minutes
page 23, EXPERT setting
.
If the AIM memory is full the oldest traffic
announcements will be deleted.
AIM memory standby
If the car radio is on
the AIM memory standby is always on when
– a traffic radio station is set;
TP
»
« is shown in the display and the
¡
–
button is "activated".
AIM TP
If the car radio is off
– AIM function (on)
page 23: EXPERT setting
.
– Before switching off the radio:
TP
Traffic radio station is set: »
« in the
¡
display and
AIM TP
button is "activated"
– aerial is ready to receive.
– If TIMER is preselected:
switch-on time(s) set.
page 23-24: EXPERT setting
or
.
PTY function
1. Activating the PTY function
¡
Press the
P TY/DX
button briefly:
the last selected programme type is shown
in the display.
2. Set the desired programme type ...
– with the PTY programme buttons
NEWS, SPORT, POP, CLASSICS or PERS
Press the respective button briefly:
the PTY search starts automatically and
moves to the next station offering the pro-
gramme type selected. The display shows
PTY ...
"
"
– or –
¡
¡
/ Cr
TAPE
¡
P TY/DX
Downloaded from
www.Manualslib.com
Listen to AIM memory
If AIM memory is on and car radio is off:
– Traffic announcements that are older than
Press
¡
button briefly; in the display ...
AIM TP
6 hours are deleted.
Example
– If the car radio is not switched on for one
MO7 O6: 15
»
«:
week with TIMER preselected (set switch-on
– 7 traffic announcements are stored.
times), switching on of the TIMER will be
– First you will listen to the last (most recent)
suppressed until the car radio is switched
traffic announcement (MO7) of 6:15 a.m.
on again (current consumption).
– Successively you will listen to all recordings.
Some vehicles, when being exited, indicate
AIM memory empty:
NO MSG
sources of current consumption that have not
»
« (No Message).
been switched off, e.g. lights. This may also
If you want a traffic announcement to be ...
be the case when the AIM memory of your car
– repeated or skipped:
radio is in standby mode.
¡
<
press
button or
NEXT
¡
> button briefly.
N EXT
Ask your car dealership whether this applies
– "fast forwarded or rewound":
to your vehicle and what can be done to reme-
¡
> button or
hold down
N EXT
dy this problem. In most cases it is sufficient
<
¡
button.
NEXT
to connect connection A7 (+12 V) of the car
radio directly to the battery and
– "Delete" AIM memory
connection A8 (– earth) of the car radio
While listening to the AIM memory, press
directly to the vehicle earth.
¡
U III
button until signal tone sounds:
NO MSG
Line cross-section at least 1,5 mm
In the display »
« (No Message).
For safety reasons it is imperative that a fuse
holder (with fuse 16 A) is used for connecting
Notes
the battery +12 V with connection A7 of the
No AIM memory standby with car radio
car radio! The fuse holder should be placed
switched off
directly (short cable) at the battery.
if, when switched off, in the display:
NO AIM
»
«.
<
>
Briefly press the
or
button until the
desired programme type is shown in the
display.
<
>
Press the
or
button until the signal
sounds.
The PTY search moves to the next station
offering the selected programme type and
POP
the programme type, for example, "
" is
shown.
If no station is offering the selected pro-
gramme type, you will hear the station
last tuned to and the PTY function is
deactivated.
3. Deactivating the PTY function
Briefly press the
¡
button, or
P TY/DX
automatically after approx. 10 seconds.
"
A F
<
>
1
5
–
manuals search engine
Radio
Programme types (PTY)
Prerequisite
The radio station tuned to must offer the "Pro-
gramme types" service PTY in the VHF range.
Programme types
The programme types a radio station offers
change according to the programme being
broadcast.
NEWS
News and current events
AFFAIRS
Politics and current affairs
INFO
Special talk programme
SPORT
Sport programme
EDUCATE Learning and continuing
education
DRAMA
Radio plays and literature
CULTURE Culture, church and society
2
.
SCIENCE
Science
VARIED
Talk entertainment
POP
Pop music (hits)
Cassette
Radio
Cassettes
are subjected to high temperatures during car
radio operation. Therefore use only high-
quality heat-resistant C60 and C90 cassettes
from name-brand manufacturers.
Dolby noise reduction is manufactured under
license from Dolby Laboratories Licensing
Corporation. DOLBY and the Double D symbol
are registered trademards of the Dolby
Laboratories Licensing Corporation.
Selecting the TAPE programme source
If a cassette is already loaded:
¡
press the
button,
TAPE
or
Insert a cassette into its compartment.
TAPE 1
The display indicates "
Attention with automatic aerials!
Your radio switches on automatically
when loading a cassette.
ROCK M
Rock music
M.O.R.M
Light music
LIGHT M
Light classical music
CLASSICS Serious classical music
OTHER M Music programmes that cannot
be categorised (e.g., Folklore)
NO PTY
No programme type identifier
PTY programme buttons
The station button
are assigned to the following programme
types:
1
2
3
NEWS,
SPORT,
POP (with
4
M.O.R.M) und
CLASSICS (with LIGHT M).
The station button
5
PERS (personal) can be assigned to a
programme type of your choice.
1. Switch on the PTY function.
¡
Briefly press the
P TY/DX
button.
<
>
2. Repeatedly press the
or
button until
the desired programme type is shown in
the display.
3. Press the
5
button until the signal sounds.
Deactivating Cr
Changing the cassette side
Press the
"
A F
Briefly press the
button or when the
sounds. The CR mode is deactivated and "
tape end is reached:
disappears from the display..
TAPE 1
"
" - upper cassette side
TAPE 2
Fast forward and rewind
"
" - bottom cassette side
Fast forward
Cassette play with and without
Press the
Dolby B NR
The display indicates "
Aborting fast forward
Activating Dolby B NR
¡
Briefly press the
/ Cr
button:
Briefly press the
Dolby B NR is activated and the display indi-
end is reached.
cates "
".
Rewind
Deactivating Dolby B NR
Press the
¡
Briefly press the
/ Cr
button:
when the tape end is reached.The display indi-
Dolby B NR is deactivated and "
" disap-
cates "
".
pears from the display.
Aborting fast rewind
Briefly press the
Selecting the tape type
end is reached.
Selecting Cr
Press the
¡
/ Cr
button until the signal
sounds. The Cr mode is activated and the dis-
CR
play indicates "
".
Radio
¡
/ Cr
button until the signal
CR
"
>
button until the signal sounds.
TAPE FF
".
<
button or when the tape
<
button until the signal sounds or
TAPE Fr
".
>
button or when the tape
Werbung
Inhaltsverzeichnis
