Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
28
Press
4-digit system PIN.
Press
4-digit system PIN again.
Note:
If the new PIN entered in Step 6 is not the same as the new system
PIN entered in Step 5, you must enter the new system PIN again from
Step 5.
Press
10.4.6
When the Call Share is set "ON", the handset and base can interrupt
an existing external call and start a conference call simply by pressing
or .
Press
Press
Press
Press
10.5
Important:
When you purchase your phone system, all handsets are already
registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or
if a handset has become faulty.
You can register up to five handsets to the base, but each handset can
only be registered to one base.
To register a new handset to your base:
Using the handset:
Press
"REGISTRATION".
Press
Enter the 4-digit system PIN (default 0000).
Press
Using the base:
Press and hold
base beeps to indicate it is in registration mode. After a short delay,
Downloaded from
www.Manualslib.com
(Left soft key) to show "NEW PIN?----", and enter your new
(Left soft key) to show "CONFIRM?----", and enter your new
(Left soft key) to confirm.
Call share
(Left soft key) and
(Left soft key) and
(Left soft key) and
(Left soft key) to confirm.
Registration
(Left soft key) and
(Left soft key) to show "PIN?----".
(Left soft key) and the display will flash "PLEASE WAIT".
on the base station for about five seconds, until the
manuals search engine
/
to select "BS SETTINGS".
/
to select "CALL SHARE".
/
to select "ON" or "OFF"
/
on the handset to select
Werbung
Inhaltsverzeichnis
