Using Your Phone - AEG Beat 15 Bedienungsanleitung

10
6
6.1
Plug the power supply and line cord into the base station.
Plug the power adapter into a 230Vac, 50Hz mains socket and the line
cord into your telephone line socket.
Always use the cables provided in the box.
Warning:
Use only the provided adaptor, using other power supplies may cause
a hazard.
Warning:
Install the base unit in a position where the mains adapter plug will
reach an easily accessible mains socket. Never try to lengthen the
mains power cable.
6.2
Place the supplied battery pack into the battery compartment with
the plug inserted correctly into the socket.
Use only the NiMH rechargeable battery type provided.
Position the battery compartment cover over the batteries and slide
up to click into place.
Put the handset on the base and charge for 15 hours before using
the handset for the first time.
The handset will give a beep when it is properly placed on the base
or charger.
7
Note:
When first powered up the base will display "PLEASE SET DATE &
TIME" and the handset will display "PLS SET TIME". If you subscribe
to Caller Display on your telephone line, the date and time will be set
automatically when you receive a call. Alternatively, use the handset
menu option "HS SETTINGS / DATE & TIME" to set the date and time,
as described in section 10.1.
Downloaded from www.Manualslib.com
INSTALLING YOUR PHONE
Connecting the base station (see P5)
Installing the cordless handset and charging the batteries
(see P6)

USING YOUR PHONE

manuals search engine