Herunterladen Inhalt Inhalt Diese Seite drucken

Title Menu; Disp Mode - Eneo VKC-1330IR12-24 Montage- Und Betriebsanleitung

Arb-kamera
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Description of the submenu settings
Submenu
WB
AE
BLC
TITLE
Display
CAM SET
Downloaded from
www.Manualslib.com
AWB
Automatic white balance
INDOOR / OUTDOOR White balance for indoor or outdoor
MANUAL
Manual white balance setting. The red and green picture
values can be adjusted with the < and > buttons.
The setting is saved with MENU key.
WAWB
Automatic white balance adjustment for wide angle
AUTO, MANUAL,
Automatic adjustment of iris, exposure control and gain
FLICKERLESS
(shutter and AGC)
SHUTTER
Normal / 100 / 125 (120) / 250 / 500 / 1000 / 2000 / 5000
/ 10000 / X2 / X4 / X8 / X16 / X32 / X64 (X: number display
low: shutter rate)
AGC
Manual adjustment of gain control (on/off)
MODE
Normal: normal mode
Low shutter: Low-shutter mode
WDR: Enhanced dynamic range mode (automatically,
AE is fixed at manual mode)
DIS: Digital image stabilization
D/N
ON: Day/Night switch is on. OFF: Manuel (if B/W in the
menu EFFECT is adjusted, then ON is Night / B/W and OFF
is Day/Colour)
Note
In WDR mode the AE should be adjusted as follows:
AUTO: When using manual lenses
MANUAL: When using AI or DC controlled lenses
CENTER, TOP,
Weighting of picture center (The gray bar indicates the
BOTTOM, OFF
actual setting).

TITLE MENU

Enter the camera title with the UP and DOWN key.
ABCDEF...-,'
Character table
CMD <– –>
Position of tiltle on the screen (must be set prior to writing).
<– –> to move the cursor, < > to delete the characters
< > S E
Store with S and leave the menu with E.
DISP0
Displays camera title and camera ID.
DISP1
Displays camera title, camera ID and zoom lens position.
DISP2
Displays all camera status.

DISP MODE

Display on, off and pushon (while the button is pressed).
ID
Input of camera ID number. This is displayed upon OSD
activation.
BPS
Select serial communication speed (9600/19200 bps)
BRIGHTNESS
User can adjust brightness level (+9 ~ –9).
SHARPNESS
User can adjust sharpness level (0~20).
manuals search engine
25
Factory Setting
AWB
AUTO
ON
Normal
OFF
OFF
DISP2
000
9600
0
08

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Vkc-1330/ir

Inhaltsverzeichnis