Mettler Toledo PFA Serie Montageanleitung Seite 4

1 Determining location
1.1
1.2
2 Excavating pit
Weighing platform dim.
Type Width
wp
PFA57x-DS 100
PFA57x-D 125
PFA57x-E 150
PFA57x-ES 150
PFA57x-G 200
PFA57x-F 70–200
4
Determining location of the weighing platform
1
Determining location of the weighing terminal
Excavate pit to dimensions specified in table below:
Considerations:
• Optimal drain location areas are depicted on dimensional drawing (see part 4).
• There are 2 possible cable conduit locations (see part 4).
• Cable conduit diameter min. 50 mm.
• Do not use right-angled pipe, but 2 x 45°.
Length Width
wp
100 150
100 175
125 200
150 200
150 250
40–150 Width
wp
Dimensions in cm
Avoid areas near doors (1).
Avoid high traffic areas (2).
Protect the weighing platform against strong air
2
movements.
Load-bearing capacity of pit base:
min. 1500 kg / 25 cm
Locate terminal for maximum visibility and easy
access.
Standard base-to-terminal cable length is 5 m.
Pit dimensions
Length Depth (c) Width (b)
150 15
150 15
175 15
200 15
200 15
+50 Length +50 15
wp
2
Frame dimensions
Length (a) Height
114 114
139 114
164 139
164 164
214 164
Width +14 Length
wp
Installation instructions 22015843A 07/01
Quick Pit PFA
9
9
9
9
9
+14 9
wp