Sharp LL-T1810A Bedienungsanleitung Seite 20

MENU 2: GAIN CONTROL
BRIGHT (brightness) and CONT (contrast) are
optimized before shipment, but depending on the
type of computer being used, further adjustment
may be necessary.
MANUAL: Individual menu options are manually
adjusted.
AUTO: Every menu option is automatically
adjusted using the Auto Gain Control*
function,
Notes:
- Press the
- To choose a menu option:
- To go to MENU 3:
*Auto Gain Control function
The Auto Gain Control adjusts contrast and
brightness based on the brightest color of the
image displayed. If you are not using the
Adjustment Pattern it is necessary to have an
area of at least 5 mm x 5 mm of white image
displayed, and if not adjustments may not be
possible. (In such case, [OUT OF ADJUST] will
appear and setting values remain unchanged.)
BRIGHT (brightness)
Total screen brightness can be adjusted while
watching the color pattern. (
CONT (Contrast)
While watching the color pattern, adjustments can be
made so that all graduations appear. (
Downloaded from: http://www.usersmanualguide.com/
Adjusting the screen display
button to select AUTO.
SELECT button
MENU button
buttons)
Color pattern
MENU 3: WHITE BALANCE
WHITE BALANCE can be adjusted as necessary.
(As adjustments are made before shipment, there is
no real necessity for further alteration.)
Notes:
- Not all graduations for COOL and WARM can be
displayed. To display all graduations, set to
STD.
- Selecting USER will display the setting values for
R-CONT, G-CONT and B-CONT, enabling fine
adjustments.
- To choose a menu option:
- To go to MENU 4:
COOL . . . Color tone bluer than standard
- . . . . . . Color tone slightly bluer than standard
STD . . . . . Color tone standard setting
- . . . . . . Color tone slightly redder than standard
WARM . . . Color tone redder than standard
USER
R-CONT . . . . . . .
G-CONT . . . . . . .
B-CONT . . . . . . .
buttons)
20
SELECT button
MENU button
button for blue-green
button for red
button for purple
button for green
button for yellow
button for blue