Electrical Connection - IKEA TREVLIG Anleitung

ENGLISH

Electrical connection

WARNING. Disconnect the appliance
from the power supply.
- Installation must be carried out by
qualified personnel who know the current
safety and installation regulations.
- The manufacturer declines all liability
for injury to persons or animals and for
damage to property resulting from failure
to observe the regulations provided in this
chapter.
- The power cable must be long enough
to allow the hob to be removed from the
worktop.
- Make sure the voltage specified on the
dataplate located on the bottom of the
appliance is the same as that of the home.
}
}
1. Remove the terminal cover (A) by
unscrewing the screw and insert the cover
into the hinge (B) of the terminal.
2. Plug the power cord into the clamp and
connect the wires to the terminal block as
shown in the wiring diagram located near
the terminal.
3. Secure the power cable with the cable
clamp.
4. Close the cover (C) and screw on the
}
terminal with the screw removed.
}
blue/grey
black/brown
yellow/green
}
}
For each connection to the network, the hob
automatically checks for a few seconds.
}
= E (yellow-green)
N1 = N (blue)
N2 = N (blue)
L1 = R (black)
L2 = S (brown)
}
1 1
}
}
}
Connection to
main power