Cable Strap - Panasonic TY-ST42PF3 Installationsanleitung

ST42PF3E改-4-11/10最終 00.11.22 8:48 AM ページ 6
Installation procedure
4. Adjust the height of the shelf if required.
5. Organising the wiring
6
Downloaded from www.Manualslib.com
350 mm
(13 25 / in.)
32
or
500 mm
(19 11 / in.)
16
Cable
straps
Cable
manuals search engine
The height of the shelf can be adjusted
to a height of either 35 cm (13
from the floor or 50 cm (19
the floor.
Use the following procedure to adjust
the height of the shelf if required.
Remove the screws which secure
the shelf to the supports.
Move the shelf to the required
height, and then secure it by
tightening the screws.
Insert the accessory cable straps into
the appropriate cable strap mounting
holes in the rear of the support.
Bring together the input cables which
are connected to the terminals at the
bottom of the Wide Plasma Display
and secure them with the cable straps.
N o t e
Note
• To loosen the cable strap:
While pushing in
the direction of the
1
arrow
Loosen the cable
strap.
25 / in.)
32
11 / in.) from
16
2