Inhaltsverzeichnis; Holder - Panasonic TY-ST42PF3 Installationsanleitung

ST42PF3E改-4-11/10最終 00.11.22 8:48 AM ページ 3
Components
Holder ..............................................1
Shelf.................................................1
Stand base.......................................1
Notes regarding setting-up location
(usage location)
•
In order to ensure correct, problem-free operation of the Wide Plasma Display, do not
install the Display in any of the following places.
• Places which are next to sprinklers or sensors
• Places which are subject to vibration or shocks
• Places which are close to high-voltage wires or electric motors
• Places in direct contact with air from heaters
•
Insert the power cord plug for the Wide Plasma Display into a wall outlet which is close
and easily accessible.
•
Provide adequate ventilation so that the temperature around the display does not rise
above 40°C (104F°). If there is insufficient movement of the air inside display, heat may
build up inside the display, and fire may result.
Downloaded from www.Manualslib.com manuals search engine
Support .....................2 M8 bolt ...........................4
(for installing supports to stand
base)
M6 screw and spring
washer...................4 each
(for installing shelf and supports)
Cable strap
.............................5
(for installing supports and

holder)

(for installing display)
M5-15 screw .............4
M5-30 screw .............4
3 3