Day/Night Function; White Balance Adjustment; Backlight Compensation; Camera Title - Sanyo VCC-XZ600P Installationsanleitung

Day/Night Function

According to the luminance level, the
viewing mode will be switched
automatically between the color mode
and the black/white mode.
You can adjust the luminance threshold
for switching the viewing mode.
LOW MID HIGH
B/W B/W B/W
Switchover point
&
[CAMERA] ⇒ [DAY/NIGHT] ⇒
[AUTO] ⇒ [LEVEL]

Backlight Compensation

b The camera uses 48-part split
metering areas to compensate the
backlight condition by metering each
area.
You can also select 5-part split
metering areas (center, left, right, top
and bottom) for metering.
&
[CAMERA] ⇒ [BLC] ⇒ [MULT] or
[CENT]
b You can mask a metering area you do
not want to meter.
&
[CAMERA] ⇒ [BLC] ⇒ [MASK]
Color Color Color
14

White Balance Adjustment

In addition to the white balance
adjustment, you can use the mask
patterns to cover extremely bright or
dark light source in the monitored image
so that the white balance adjustment is
properly configured.
&
[CAMERA] ⇒ [WHITE BALANCE] ⇒
[ATW] ⇒ [MASKING]
Privacy Masks
The privacy masks can be used to
protect privacy by hiding certain part of
the monitored image.
(Maximum 4 masks)
&
[PRIVACY MASK]

Camera Title

You can set and display the camera title.
This helps you confirm from which camera
the image is sent when multiple cameras
are connected. (Maximum 16 characters)
&
[OPTION] ⇒ [DISPLAY] ⇒ [TITLE]
ROOM1
ROOM1 ROOM2
ROOM2