Samsung DW60M9970 Serie Installationshandbuch Seite 139

STEP 3 Check the water line
• The water line pressure must be between 0.05 and 0.8 MPa.
• Make sure that the water temperature does not exceed 60 °C. Hot water over 60 °C
may cause the dishwasher to malfunction.
• Make sure that the water supply valve is turned off before connecting the water supply
line to the dishwasher.
DW9000M_DD68-00193G-00_EN.indd 11
4. Find the sub foot in the installation
kit. Insert the sub foot into the hole of
the rear foot's place, and then turn the
screwdriver clockwise to tighten the
sub foot.
5. When the sub foot is fixed, turn the
front foot to align with the sub foot.
Fine-tuning will be done in STEP 5.
CAUTION
Use caution when moving the dishwasher.
Do not drag the dishwasher on the floor.
This can damage the front and sub foot.
English 11
8/30/2018 4:03:49 PM