Assembly And Connection; Unpacking - AEG DVD 4553 LCD Bedienungsanleitung

Damage

Unpacking

Assembly
Head-rest mounting
If the unit is damaged:
K
To avoid endangerment in the event the network connector is dam-
aged only the manufacturer or their customer service may replace the
part.
K
If moisture penetrated the unit or the unit has been dropped or has
been damaged otherwise, an authorized specialized dealer must
evaluate the damage. Disconnect the unit and contact an authorized
dealer.

Assembly and Connection

Please unpack the unit and all accessories and check the contents for
completeness.
CAUTION:
Always transport/ship the unit in the original packing to avoid damages.
Retain the original packing materials for this purpose. Recycle useless
packing material in accordance with your countries regulations.
NOTE:
Damages due to transport must be reported to the supplier immedi-
ately.
1. Place the unit on a stable, level and lat surface. Maintain a distance of
a minimum of 10 cm from walls and other objects.
2. Connect the unit to an outlet installed according to regulations.
3. Remove protective cover from device /LCD Screen if applicable.
For installation, you must fold up the device accordingly.
WARNING:
The headrest mount is not suitable for use while driving. Risk of injury!
NOTE:
The supplied headrest mount is only intended for stationary operation.
CAUTION:
The display can be rotated by 180° only in one direction.
1. Rotate the display by 180° in clockwise direction. Now you may fold
the display downwards with the back to the device.
2. Open the Velcro fasteners on the headrest mount and slide the
device into the mount. Then close the Velcro fasteners again. But not
too tight so that the close-up operation is not triggered accidentally.
3. Now attach the device horizontally by using the fastening straps on
the headrest.
English
39