Connection To Other Equipment - AEG DVD 4528 TFT Bedienungsanleitung

Connection to a television set
(AV OUT Fig. 1/5)
Use of ear/headphones (Fig. 1/7)
05-DVD4528TFT_GB.indd 39 05-DVD4528TFT_GB.indd 39
After use the 9 V adapter should be removed from the device and
from the cigarette lighter socket.

Connection to Other Equipment

If the television set has audio/video inputs.
If the television set has a Scart connection.
Playback of a DVD on the Television Set
1. Turn on the DVD player by the ON/OFF switch.
2. Turn on the television set and follow the instructions supplied with
the television set.
NOTE:
Please ensure that the correct audio/video cable is used as the
wrong cable will produce a weak signal.
DVDs are copy-protected and cannot be copied. If a DVD is copied
onto a video cassette you will see a blurred picture with poor
sound quality. This is NOT the fault of the device!
1. If you use a set of headphones you should use one with a 3.5 mm
stereo jack, which should be inserted into headphone socket ( ).
2. With the VOLUME control (Fig. 1/8) you can set the desired volume.
WARNING:
Make sure that the volume of your headphones or earphones is
not too high, as otherwise this may damage your ears and you may
endanger yourself or others.
In order not to disturb those around you the volume should be set
to a low level.
If you suffer from tinnitus you should turn the volume down low
or refrain from using this device.
Ear doctors recommend that earphones should not be used conti-
nuously over a prolonged period.
English
39
30.11.2007 9:50:05 Uhr 30.11.2007 9:50:05 Uhr