AEG DVD 4553 LCD Bedienungsanleitung Seite 50

English
50
Select File/Index and
Start Playback
Exit Play
Display Photos
CAUTION:
Before removing the USB storage device, switch the device to another
mode.
Communication media may contain numerous data/files and indexes.
Therefore you must specify which files should be played.
1. If not yet done, now insert the CD or DVD into the drive or connect a
device.
2. A menu window listing the directories (if directories exist) or the files
appears.
3. Use the navigation buttons (Fig. 2/20) in the list to select the desired
directory or the file.
4. Press OK (Fig. 2/19) to confirm.
File: The file content is displayed or played if a file is selected.
Directory: If a directory is selected the file list opens.
Select the desired file with the navigation buttons and OK (Fig. 2/19).
The file content is displayed or played if a file is selected.
Note:
Numerous reproduction and compression procedures as well as differ-
ences in quality of CDs/DVDs and burned CDs and DVDs are available.
Because of this reason problems with the play of files, (i.e. files may be
displayed but cannot be played), may occur in isolated cases. This is not
a malfunction of the unit.
NOTE:
Press " " (Fig. 2/20) to return from the file list to the directories.
Press the "STOP" button (Fig. 2/7) on the remote control to exit play-
back.
The DVD-Player is equipped to display your digital photos. These photos
may be stored on any media supported by your DVD-player (DVD, CD,
etc.).
NOTE:
K
Ensure an acceptable photo size. Very large photos may be displayed
at a very slow speed or not at all. Ideally the photo size corresponds
with the picture format of the play. In TVs this is normally
1024x576 Pixel (size 16:9) or 768x576 (Size 4:3).
K
Please be aware that any conversion may lead to loss of information
regarding the original format.
Start the photo display by selecting the file you would like to start the
display with Page 50, "Select File/Index and start playback".