Installation - GF 160 Bedienungsanleitung

Function
Type 160
normally closed (NC)
Type 161
mixing valve; normally pressure
port P2 is connected to outlet A,
P1 closed
The technical data are not binding. They are not warranted characteristics and are
subject to change. Please consult our General Conditions of Supply.

Installation

May be installed in any position. Observe flow direction.
Solvent joints: Use special cement for PVC.
Union nuts: Tighten uniformly by hand only.
Always remove impurities in pipes (seal material, swarfs, etc.).
Valve body must not be distorted by improper fastening.
Do not use solenoid coil as a "lever".
Manual override: Manual override is operated by pressing in and turning
to the right (clockwise).
normally open (NO)
distribution valve; normally
pressure port P is connected to
outlet B, A closed