Personal Profile; Selecting Step Keys - G&D DP1.2-MUX3-ATC-Serie Installation Und Bedienung

Configuration settings in the OSD
6. In the
Freeze mode
Off:
On|OSD
timer+Frame:
On|OSD timer:
On|Frame:
7. Press to save your settings.
F2

Personal profile

Selecting step keys

After activating the stepscan mode (see page 15), you can press a key to switch to the
next or the previous computer.
In the default settings of the KVM switch, the
purpose. You can also select a different set of dedicated keys.
How to select the keys to use with the stepscan function:
1. Press
Ctrl+Num
2. Press to open the personalö profile of the user logged in.
F10
NOTE: To change the personal profile of another user, press
select
Users > [Username] > Personal Profile
3. In the
Stepscan keys
Up|Down:
PageUp|PageDown:
43 · G&D DP1.2-MUX3-ATC
field select between the following options by pressing
Show no image if connection is lost (default).
Show the last image after disconnection.
The disconnection is indicated by the display of the time since
the disconnection and a coloured frame.
Show the last image after disconnection.
The disconnection is indicated by the display of the time since
the disconnection.
Show the last image after disconnection.
The disconnection is indicated by a coloured frame.
(default) to open the on-screen display.
field, select one of the following options by pressing
Up and Down
.
 Use the key to switch one channel up.
Up
 Use the Down key to switch one channel
down.
 Use the PageUp
up.
 Use the
PageDown
down.
keys are provided for this
and
F11
key to switch one channel
key to switch one channel
:
F8
:
F8