Setting Up Failover Switching - G&D DP1.2-MUX3-ATC-Serie Installation Und Bedienung

Configuration settings in the OSD
5. In the
USB keyboard mode
PC standard:
PC multimedia:
Apple A1243:
LK463:
6. Press to save your settings.
F2

Setting up failover switching

The
Failover switching
nel when the status of the active channel changes from online to offline..
The OSD message
the failover channel..
By default, this function is disabled. You can configure the function separately for
each channel by specifying the desired failover channel.
ADVICE:
You can set up a failover chain, for example, by setting the failover channel
to the next channel.
If the failover channel is also offline when failover switching occurs, the system
switches to the failover channel of the failover channel (etc).
If no other channel is online, failover switching stops.
How to configure a failover channel for a KVM channel:
1. Press Ctrl+Num
2. Press F11 to open the configuration settings.
3. Use the arrow keys
4. Use the
arrow keys
39 · G&D DP1.2-MUX3-ATC
fields select one of the following options by pressing
Standard keymode
Support for special multimedia keys
Keymode for Apple computers
LK463-compatible keyboard
function automatically switches to the configured failover chan-
Failover switching
(default) to open the on-screen display.
to select CPUs and press
to select a video channel (
informs you about the automatic switching to
Enter .
to
CPU1
) and press
CPU 3 Enter
:
F8
.