Specifications - GreenWorks 21277 Bedienungsanleitung

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SV HR HU RO BG EL AR TR HE LT LV ET

SPECIFICATIONS

Rated power
Rated voltage
No load speed
Cutting capacity
Vibration
Sound power level
Sound pressure level
Weight (without cord)
DESCRIPTION
1. Trigger
2. Rear handle
3. Cord retainer
4. Power cord
5. Telescoping boom cam lock
6. handle adjusting knob
7. Nylon cutting line
8. Safety guard
9. Spool cover
10. Cut-off blade
11. Plant protector
12. Lower shaft
13. Collar
14. Upper shaft
15. Timmer/Edger shift button
16. Auxiliary handle
17. Line release button
18. Spool cover lock buttons
19. Spool
20. Eyelet
21. Button
English (original instructions)
500 W
220-240 V ~50Hz
8000 RPM
30 cm
4.9 m/s², k=1.5 m/s²
L : 96 dB(A)
WA
L : 82.4 dB(A), K : 3 dB(A)
PA PA
2.77 kg
Noise value
ASSEMBLY
UNPACKING
Carefully remove the product and any accessories
■
from the box.
Inspect the product carefully to make sure no breakage
■
or damage occurred during shipping.
Do not discard the packing material until you have
■
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call your
■
Greenworks Tools service centre for assistance.
The line trimmer is supplied with some components not
assembled. To assemble these, proceed as follows:
ATTACHING AUXILIARY
DEFLECTOR (Fig. 2-3)
Remove supplied screw with a phillips screwdriver
■
from the trimmer head.
Fit the grass deflector into the slots on trimmer head.
■
Turn counterclockwise to lock grass deflector into place
■
Line up the screw hole in the grass deflector with the
■
centre hole in the trimmer head.
Install supplied screw and tighten by turning clockwise
■
with a phillips screwdriver.
ATTACHING SHAFT (Fig. 4)
Unlock the cam lever and insert the lower shaft through
■
the guide groove till hearing "click".
Unlock the cam lever and stretch the shaft to the
■
suitable position, then lock the knob.
1
HANDLE AND GRASS