Herunterladen Inhalt Inhalt Diese Seite drucken

About The Indications In The Display - Sony STR-SL500 Bedienungsanleitung

Fm stereo fm/am receiver
Vorschau ausblenden Andere Handbücher für STR-SL500:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

About the indications in the display

1
2
3
4
DIGITAL DTS
SW
L
PRO LOGIC II
LFE
SL
q;
9
A ; DIGITAL: Lights up when the receiver is
decoding signals recorded in the Dolby Digital
format.
B DTS: Lights up when DTS signals are input.
C SW: Lights up when sub woofer selection is
set to "YES" (page 13) and audio signal is
output from the SUB WOOFER jack.
D Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters vary
to show how the receiver downmixes the
source sound (based on the speakers settings).
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing))
Example:
Recording format (Front /Surround): 3/2
Output channel: Surround speakers absent
Sound Field: A.F.D. AUTO
L
C
SL
E Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 16–20 for tuner operations.
F D.RANGE: Lights up when dynamic range
compression is activated (page 26).
C
R
S
SR
R
SR
G COAX: Lights up when the source signal is a
digital signal being input through the COAX
terminal.
H OPT: Lights up when the source signal is a
digital signal being input through the OPT
terminal.
I LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
J ; PRO LOGIC II: "; PRO LOGIC" lights
up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. "; PRO LOGIC II" lights up when
the Pro Logic II Movie/Music decoder is
activated. However, both indicators do not
light up if both the center and surround
speakers are set to "NO" and "A.F.D. AUTO",
"DOLBY PL", "PLII MOV" or "PLII MUS"
is selected.
Note
Dolby Pro Logic and Dolby Pro Logic II
decoding do not function for DTS format signals.
5
MEMORY
ST
MONO
D.RANGE
RDS OPT COAX
8
7
6
21
GB

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis