JÄGER ADwin-X-A20 Handbuch Seite 179

ADwin
Beispiel
REM Example process for one module HSM-24V and ADwin-X
#Include ADwin-X.inc
Init:
Processdelay = 4000000
Par_1 = LS_DIO_Init(1)
REM enable watchdog time with 1.1 sec
Par_2 = LS_Watchdog_Init(1, 1, 1100)
REM LS channels 1...32 as outputs
Par_3 = LS_Digprog(1, 0Fh)
Event:
REM set one LS channel to high, rotating from 1 to 32
Inc Par_10
If (Par_10 >= 32)
Par_11 = Shift_Left(1, Par_10)
REM reset watchdog, set LS channels, and read back real state
REM (note: LS_Dig_IO uses LS address 1)
Par_12 = LS_Dig_IO(Par_11)
ADwin-X-A20, Handbuch Sep. 2019
'10Hz HP
Then Par_10 = 0
LS-Bus + ADwin-X-A20
LS_Dig_IO
173