Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Caution: The suction hole opening must be open and free of any obstructions at all times. Otherwise, the motor
will overheat and could become damaged.
CLEANING AND MAINTENANCE
1.
Before cleaning the product, turn off power and remove the battery pack.
2.
Do not immerse the main unit, battery pack, charging base in water or any other liquids.
3.
Square brush and 2-in-1 crevice nozzle can be cleaned in water; dry thoroughly before use.
4.
Use only a soft dry cloth to clean the appliance.
5.
Do not use aggressive chemicals or abrasives.
6.
Do not use the device if the filter is broken or worn out.
7.
The unit does not contain parts serviceable by you, do not disassemble it and do not try to repair it yourself.
8.
Store the appliance indoors. Ensure the appliance is at room temperature before operating.
1. How to empty the dust cup:
Hold the dust cup over a bin. Then push down the dust release button to open the dust cup cover, and pour out
the dust. (Fig. 4)
Fig. 4
2. How to clean the dust cup filter:
1) First empty the dust cup, then pull up the dust cup release button to take off the dust cup. (Fig. 5)
2) Remove the filter unit (A) and knock off the dust gently, then reinstall it. (Fig. 6)
3) If the the filter unit (A) is very dirty, you can disassemble the fitler unit and clean the filter cover, sponge and
HEPA filter: (Fig. 7)
a)
Disassemble the filter unit: filter cover (B), sponge (C) and HEPA filter (D).
b)
Wash them under running water. Please do no use brush and detergent to clean.
c)
Knock off the water gently.
d)
Air dry for 24 hours and make sure it's completely dried.
e)
Reinstall them to the main unit.
Fig.2
Fig. 5
- 14 -
Fig. 6
Fig.3
Werbung
Inhaltsverzeichnis
