Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HV-124827.2
PARTS DESCRIPTION
1. Battery pack
2. Handle
3. Power / speed button / indicator
4. Dust release button / dust cup release
button
5. Dust cup
6. Suction hole opening
7. Charging connector
8. Charging base
9. Square brush
10. 2-in-1 crevice nozzle
BATTERY CHARGING (Fig.1)
1.
First, install the battery pack into the main unit.
2.
Then, simply dock the appliance onto the charging base for re-charging. Plug the charging adapter into the
power socket.
3.
While charging, the indicator will be red and blinking; when the charging is finished, the indicator will be
green and stay lit.
4.
After charging, unplug first, then you can use the appliance to clean or let it rest on charging base.
Note:
1.
It takes approx. 4 hours to fully charge.
2.
During operation, if the battery has lower power, the indicator will turn red and blink 3 seconds; then the
appliance will stop working.
3.
Square brush and 2-in-1 crevice nozzle can be stored on the charging base.
4.
How to take the battery pack out: grasp the battery release button in two sides, then press to take it out
Fig. 1
OPERATION
1. Attach the square brush / 2-in-1 crevice nozzle to the suction hole opening; make sure it fits firmly. (Fig. 2)
2. Press the power button once, the appliance starts to work in low speed; Press the button again, the appliance
will run in high speed; Press the button in third time, the appliance will be off. (Fig.3)
Note: when the appliance is working, the indicator light will be green.
- 13 -
EN
Werbung
Inhaltsverzeichnis
