Know Your Product; Prior To Initial Operation - Sparky Professional TH 65 Originalbetriebsanleitung

▪ Always keep the cord away from the working
area of the power tool.
▪ Never use the machine with a damaged cable.
Do not touch the damaged cable and pull the
mains plug when the cable is damaged while
operating. Damaged cables increase the risk of
electric shock.
Hold the power tool by insulated gripping sur-
faces while performing an operation where the
operating tool may contact hidden wiring or its
own cord. Contact with a "live" wire will make
exposed metal parts of the power tool "live"
▪ Always hold the machine for the insulated grip-
ping surfaces while performing an operation
where the operating tool may contact hidden
wiring or its own cord. Contact with a "live" wire
will make exposed metal parts of the power tool
"live".
▪ Keep work area clean. Blends of materials are
particularly dangerous. Dust from light alloys
can burn or explode.
▪ Always wait until the machine has come to a
complete stop before placing it down.
▪ The tool must be used only for its prescribed
purpose. Any use other than those mentioned
in this Manual will be considered a case of mis-
use. The user and not the manufacturer shall
be liable for any damage or injury resulting from
such cases of misuse.
▪ To use this tool properly, you must observe the
safety regulations, the assembly instructions
and the operating instructions found in this
Manual. All persons who use and service the
machine have to be acquainted with this Manu-
al and must be informed about its potential haz-
ards. Children and frail people must not use this
tool. Children should be supervised at all times
if they are in the area in which the tool is being
used. It is also imperative that you observe the
accident prevention regulations in force in your
area. The same applies for general rules of oc-
cupational health and safety.
▪ The manufacturer shall not be liable for any
changes made to the tool nor for any damage
resulting from such changes.
▪ Power tools must not be used outdoors in rainy
weather, or in moist environment (after rain) or in
close vicinity with easily flammable liquids and
gases. The working place should be well lit.
6
EN
pages-TH 65-65E-70E-R2.indd 6
V - Know your product
Before using the power tool, familiarize yourself with
all the operating features and safety requirements.
Use the tool and accessories only for the applica-
tions intended. All other applications are expressly
ruled out.
1. ON/OFF switch
2. Variable speed regulator (TH 65E, TH 70E)
3. Lock-on button
4. Fence
5. Base plate
6. Bevel angle scale
7. Saw blade
8. Pendulum stroke knob
9. Dust extraction adapter
10. Roller guide
11. Anti-scratch shoe (TH 70E)
12. P arallel guide
13. P arallel guide fixing screw
14. Blade guard
15. LED work area light (TH 70E)
16. Hex key
17. Blade quick release button
VI - Operation
This power tool is supplied from single-phase al-
ternating current mains only. It is double insulated
according to EN 60745-1, IEC 60745 and can be
connected to grounded or not grounded sockets.
This power tool is radio suppressed in compliance
with EMC Directive 2004/108/EC.
This power tool is designed for sawing wooden,
plastic and metal plates and shapes.

priOr TO iniTial OpEraTiOn

▪ Make sure the power supply voltage corre-
sponds to the value indicated on the name plate
with technical data of the tool.
▪ Always check the position of ON/OFF switch.
The power tool must be connected to the power
supply socket only when this switch is in OFF
position. If the plug is connected to a recepta-
cle while the power switch is in the ON position,
the power tool will start operating immediately,
which could cause a serious accident.
▪ Make sure that the cord and the plug are in or-
der. If the replacement of the supply cord is nec-
essary, this has to be done by the manufacturer
or his agent in order to avoid a safety hazard.
▪ Always make sure that the blade is secured in
the holder.
TH 65 • TH 65E • TH 70E
20.10.2011 г. 15:31:44