Quick Charge; Charging In The Charger; Charging In The Jet Clean System (Speciic Types Only) - Philips RQ1100 Serie Bedienungsanleitung

Quick charge

After the shaver has charged for 5 minutes, it contains enough energy for
one shave.

charging in the charger

1 Insert the small plug into the charger.
2 Unfold the charger ('click').
3 Put the adapter in the wall socket.
4 Put the shaver in the charger (1) and press it backwards until it locks
into place (2).
, The display shows that the shaver is charging (see section 'Charging'
in chapter 'The display').

Charging in the Jet Clean System (speciic types only)

1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Hold the shaver upside down above the holder with the back of the
shaver pointing towards the holder.
Note: RQ1180 only: when you turn the shaver upside down, the battery
indication on the display is also turned upside down so you can still see to what
level the battery is charged.
4 Place the shaver body in the holder behind the two clips (1) and
press it down until it locks into place (2).
Note: The shaver cannot be placed in the Jet Clean System when the protection
cap is on the shaving unit or when the trimmer is placed on the shaver.
, The display shows that the shaver is charging (see chapter
'The display').
English
9