Mopping Mode; Preparing The Water Tank - Medion MD19601 Bedienungsanleitung

When the battery charge level is low, the robot vacuum cleaner auto-
matically returns to the charging station. This return to the charging sta-
tion interrupts the cleaning process.
 Press the On/Off button twice in quick succession to have the robot vacuum
cleaner return to the charging station. The operating LED flashes green until the
robot vacuum cleaner has reached the charging station.
 Press and hold the On/Off button and the bumper
at the same time for approx. 3 seconds to switch off
the robot vacuum cleaner completely.
 With the appliance switched off, clean the suction
opening at regular intervals and empty the dust con-
tainer after every use.
8.

Mopping mode

NOTICE!
Risk of damage to property!
Leaking water may lead to water damage to the floor
covering.
 Only use the wiper robot on tiles and sealed floor
surfaces.
8.1.

Preparing the water tank

Your robot vacuum cleaner can be converted for use as a wiper robot using the ac-
cessories supplied. To do so, proceed as follows:
 Secure one of the mop attachments to the water
tank.
 Insert the mop attachment with the three tabs on
the lower end into the retaining lugs for the mop
attachment on the water tank.
 Firmly press the mop attachment onto the mount-
ing pads on the bottom of the water tank.
212
19601 ML DirectSales ML Content 5006 4564 RC1.indb 212 19601 ML DirectSales ML Content 5006 4564 RC1.indb 212 24.09.2020 14:08:18 24.09.2020 14:08:18