Panasonic CF-VDW07CH Zusatzanleitung Seite 8

Replace the illustration in page 6 of "OPERATING INSTRUCTIONS" as follows.
Replace page 7 and 8 of "OPERATING INSTRUCTIONS" as follows.
Precautions
THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF,
NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/
SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS
WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE
USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.
*1
AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag
(EFB) Systems and Class1 EFB Systems when used during critical phases of flight
(e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Sys-
tems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA:
JAA TGL (Temporary Guidance Leaflets) No.36.
Panasonic cannot guarantee any specifications, technologies, reliability, safety
(e.g. Flammability/Smoke/Toxicity/Radio Frequency Emission, etc) requirements
related to aviation standards that exceed the specifications of our COTS (Com-
mercial-Off-The-Shelf) products.
This wireless display is not intended for
use in medical equipment including life-
support systems, air traffic control sys-
tems, or other equipment, devices or
systems that are involved with ensuring
human life or safety. Panasonic cannot
be held responsible in any way for any
damages or loss resulting from the use
of this wireless display in these types of
equipment, devices or systems, etc.
The CF-VDW07 was developed based
on thorough research into the real-world
portable computing environments.
Exhaustive pursuit of usability and reli-
ability under harsh conditions led to
innovations such has the magnesium
alloy exterior and flexible internal con-
nections. The CF-VDW07's outstanding
engineering has been tested using the
strict MIL-STD- 810F (for vibration and
8
shock) and IP (for dust and water)
based procedures.
As with any portable wireless display
device precautions should be taken to
avoid any damage. The following usage
and handling procedures are recom-
mended.
Before putting the wireless display
away, be sure to wipe off any moisture.
If a Malfunction Occurs, Immediately
Unplug the AC Cord and the Battery Pack
• Wireless display is damaged
• Foreign object inside wireless display
• Smoke emitted
• Unusual smell emitted
• Unusually hot
Continuing to use the wireless display
while any of the above conditions are
present may result in fire or electric shock.
*1
. PANASONIC