Balluff BIS C-300 Serie Handbuch Seite 26

C3-slk_716464_E_1110.p65
11
Tabular Overview
12
Tabular
Overview
Criteria Types:
Size
Read/write orientation
Antenna form
Distance 3)
Enclosure per DIN 40 050
Housing material
Mounting 2 nuts SW
Screws
Connection to the BIS C-6_ _
Cable length
Cable material
Temperature ambient
storage
Weight
1) In the part number for read/write heads, _ _ is for inserting the desired cable length: 01 = 1 m, 05 = 5 m, 10 = 10 m
2) -Double antenna for increased traverse speed
3) The distance is defined as free space between two read/write heads of equal size. When the two read/write heads differ in size or when the data carrier is larger
than the read/writre head, the distance of the larger device has to be applied.
4) appropriate connector cable: BIS C-505-PU-_ _ / BIS C-506-PU-_ _ / BIS C-517-PVC-_ _ / BIS C-518-PVC-_ _
For details, see ordering information for cable and connectors
5) only with BIS C-520-PVC-05 with 5-pin connector
6) only with BIS C-516-PU-_ _ with 8-pin connector
12 english
Selection Criteria
Read/Write Heads Series BIS C-3_ _
The table lists read/write heads which can be flush mounted in steel. For notes on installing
in aluminium, see 14. The read/write orientation may be any, since a round antenna form
is used for these read/write heads.
1)
Criteria Types: BIS C-300-_ _
Size [mm] Ø 14.5 × 55
Distance 2) [mm] 32
Enclosure per IEC 60529
Housing material CuZn
Nickel
plated
Mounting 2 nuts SW secure in
Screws slot
Connection to the
BIS C-6_ _
1)
Cable length [m] 1, 5, 10
PU
Cable material
Temperature
Weight [g] 210
1)
in the part number for read/write head, _ _ is for inserting the desired cable length:
01 = 1 m, 05 = 5 m, 10 = 10 m
2) The distance is defined as free space between two read/write heads of equal size. When the two read/write
heads differ in size or when the data carrier is larger than the read/write head, the distance of the larger
device has to be applied.
3)
appropriate connector cable: BIS C-505-PU-_ _ / BIS C-506-PU-_ _ / BIS C-517-PVC-_ _ / BIS C-518-PVC-_ _
For details, see ordering information for cable and connectors
Selection Criteria
Read/Write Heads Series BIS C-3_ _
The table lists read/write heads which cannot be flush mounted in steel. For notes on
installing in aluminium, see
1) BIS C-319/_ _-S4 C-323/_ _-S4 C-315/_ _-S4 C-319-_ _ C-326-_ _ C-310-_ _
[mm] M18×1 M30×1.5 80 × 106
× 86.5 × 70.5 × 40
non-directional
[mm] 180 180 180
Plastic X8CrNiS 18-9 Plastic
PBT PBT
24 36
4 × M5
using a connection cable 4)
[m] 1, 5, 10 5, 10 5, 10
4) 4) 4)
[°C]
[g] 40 90 410
C-306-_ _ C-302-_ _ C-305-_ _
M16×1 61.5 × 33 50 × 25
× 55 × 40 × 10
32 32 40
IP 67
Brass Al Mg3 / ABS-GF16 Plastic PBT X6CrNiMoTi
Nickel PA66
plated
22
2 × M4 2 × M4
direct, using molded-on connection cable
with 4-pin connector
1, 5, 10 5, 10 1, 5, 10
PU PU PVC/PU
Ambient 0 °C to +70 °C / storage –20 °C to +85 °C
200 270 230
14.
C-318-_ _
M18×1 M30×1.5 M30×1.5 186 × 48
× 80 × 83,5 × 70 × 30
round
180 60 60 1000
IP 67
Plastic Plastic CuZn Plastic
PBT PVDF Nickel PA66
plated
24 36 36
4 × M5
direct, using moded-on connection cable
with 4-pin connector
1, 5, 10 5, 10 1, 5, 10 5, 10
PU PU PU PU
0 to +70
-20 to +85
197 270 314 550
C-315-_ _ C-325/_ _-S4 C-324/_ _-S4
80 × 80 M18×1 40 × 41
× 40 × 45 ×74.5
180 60 60
Plastic PBT
17-12-2
24
4 × M5 2 × M5
using a connection cable 3)
1, 5, 10 1, 5, 10 5, 10
PVC/PU 3) 3)
510 26 180
english
C-351-_ _ C-355/05-S92 C-350-00,3
170 × 80 240 × 120 240 × 120
× 60 × 60
directional
Bar Bar 2) Bar
1000 1000 2000
IP 65 IP 67
Polyacetat Plastic Plastic PC
PC
4 × M6 4 × M4 4 × M4
5) 6)
5, 10 5 0.3
PU 5) PU
0 to +70 0 to +40
-20 to +85 -20 to +85
595 710 967
11