INSTALLATION MANUAL M-TECH LED KIT
1
BEFORE INSTALLATION
A
2
IMPORTANT INFORMATION
Please read the installation manual carefully before installing the LED kit.
Attention:
•
Before installation, please make sure the LED bulbs are clean and undamaged.
•
Even though the control box is waterproof and heat-resistant, installation on the hot engine parts is not advised.
•
Make sure the LED bulbs are appropriate for your car model.
•
Make sure your car battery is disconnected during the installation process.
Warning:
•
Make sure the LED chips are clean before installation.
•
Do not stare directly at the LED bulbs when they are switched on.
•
Do not touch the LED bulbs when they are switched on.
Other :
•
Check if the installed LED bulbs work properly and there is no warning sign appearing on your dashboard.
•
Make sure the dust cover is installed properly.
•
Make sure that none of the newly installed wires interfere with any other wires.
•
Do not overbend the wires.
Confirm whether overall size of the LED bulb can fit in the lamp
housing:
a) Original bulb installed outside the dust cover;
b) Original bulb installed inside the plastic lamp housing.
B
9 |