Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ConDTrol sMarT 2D Green
en
Cross line laser
user manual
oPERatIoN
remove the battery cover, insert the batteries, observing correct
polarity. light indicator will be on, when the power is low.
Place an instrument on a firm and stable surface or a tripod. move
lever lock to choose necessary operating mode:
1) Blocked compensator, to build inclined lines and planes:
move lever lock to locked position
. compensator is locked.
Press and hold button
for 3 seconds to switch on laser planes.
2) automatic levelling, to build horizontal and vertical lines and
planes:
move lever lock to unlocked position
. compensator is unlocked.
laser lines blink when the instrument is out of self-levelling range.
short press button
to switch on laser planes.
to switch off the product move lever lock to «oFF»
position.
8
Werbung
Inhaltsverzeichnis
