G&D Audio-Transceiver-CAT Installationsanleitung Seite 22

Installation
Installation
Transmitting audio data between a computer and a remote console requires two sig-
nal extenders of the
Place one signal extender next to a computer. Place the second signal extender next
to the console's input and output devices.
Connecting a signal extender to a computer
Trans.
Insert the RJ45 plug of the optionally available twisted pair cable. Connect
Trans:
the other end of the cable with the Trans. interface of the signal extender placed at
the workstation.
NOTE: Signal extenders of the
ing audio signals. The analogue (
) can be used at the remote station.
Out
Digital Audio – Out:
In interface to this interface.
Use a RCA (Cinch) audio cable to connect the computer's SPDIF-
Digital Audio – In:
Out interface to this interface.
Use the supplied audio cable to connect the computer's Line-Out
Line In/Micro In:
interface to this interface.
You can also connect a microphone to this interface.
Line Out/Speaker: Use the supplied audio cable to connect the computer's Line-In
interface to this interface.
You can also connect speakers or a headset to this interface.
Power: Connect the portable power pack to this interface.
3 · Audio-Transceiver-CAT
Audio-Transceiver-CAT
Audio
Service
Power
Audio-Transceiver
Line Out
Use a RCA (Cinch) audio cable to connect the computer's SPDIF-
series.
Digital Audio
Out In
Audio-Transceiver-CAT
series automatically convert incom-
) or the digital audio signal (
Line In/ Line Out/
2 3
Micro In Speaker
1 4
0 5
9 6
8 7
Digital Audio –