Introduction; Package Contents - G&D Audio-Transceiver-CAT Installationsanleitung

Introduction

By using two signal extenders of the
audio signals between a computer and a remote console via a category 5e (or better)
twisted pair cable connection.
Audio signals are transmitted in both directions between the connected extenders.
A rotary switch lets you amplify the analogue audio signal coming in at the interface
Line In/Micro In (see page 5).

Package contents

IMPORTANT: Transmitting audio signals requires two signal extenders. The package
contents given below refer to one device.
 1 × Signal extender
 1 × Portable power pack
 1 × Power cable
 1 × Audio cable (Audio-M/M-2-ferrite)
 1 × RCA audio cable (Audio-SPDIF-COAX-M/M-2)
 1 × Service cable (USB-Service-2)
 1 × Manual
Audio-Transceiver-CAT
Audio-Transceiver-CAT
Introduction
series, you can transmit
Audio-Transceiver-CAT · 2