Setting The Time Manually; Resetting The Settings; Cleaning And Care - Auriol HG06544A Bedienungs- Und Sicherheitshinweise

Note: If the wall clock was not able to receive the DCF / MSF radio time signal
because of errors, e .g . due your location to being at too great a distance from the
transmitter or for other reasons, you can set the time manually . The manually set
value is overwritten as soon as reception of the DCF / MSF radio time signal is
successful .
Note: For products in tended for Romania, Cyprus, Bulgaria, Finland and Greece,
the display stops at "01:00" .
˜ Setting the time manually
Press and hold the SET button
into manual mode .
Press and hold the SET button
position for you to set the time .
Briefly pressing the SET button
steps to enable you to set the current time manually .
Note: After 8 seconds without pressing the SET button
switches out of manual mode and keeps the time as normal . The manually set
value is overwritten as soon as the reception of the DCF / MSF radio time signal is
successful .
˜ Resetting the settings
Press the RESET button
remove the battery from the product and insert it again . The product now
automatically starts to search for the DCF / MSF radio time signal .
Note: Press RESET button
˜ Cleaning and care
The product should only be cleaned on the outside with a soft dry cloth .
If the wall clock is not going to be used, remove the battery .
24 GB/IE
2
at least 3 seconds . The wall clock switches
2 again until the hands reach the correct
2
moves the hands forward in one minute
4
to reset the radio clock settings . Alternatively,
4
with a pointed object (e .g . pencil) .
2
, the wall clock