Digital Rocking/Waving Shaker Control Panel - OHAUS SHRK07AL1 Bedienungsanleitung

D.

DIGITAL ROCKING/WAVING SHAKER CONTROL PANEL

The front panel of the Rocking/Waving Shaker contains all the controls and displays
needed to operate the unit.
A. Standby button/standby indicator light: The standby indicator light will illuminate
when the unit is plugged in. The unit will be in standby mode. Press the standby
button to activate the speed/tilt angle and time functions. The standby indicator light
will shut off and the speed/tilt angle display and time display will illuminate. Press
the standby button again and the unit will once again be in standby mode.
B. Speed/tilt angle display: Displays the speed and tilt angle of the unit. C. Up/down
arrows for set-point control. On/off button starts/stops the rocking/waving function.
D. The speed/tilt angle indicator light will be illuminated when the unit is rocking/
waving.
1.800.561.8187
F. G. B. H.
E.
C. I.
E. Function button: Press to choose the function you are setting: speed or tilt.
F. Speed indicator light: Illuminates when the speed is displayed.
G. Tilt indicator light: Illuminates when the tilt angel is displayed.
H. Time display: Displays accumulated time (continuous mode) or how much time is
remaining (timed mode). The display range is from 0 to 9,999 minutes in one (1)
second increments. The display will indicate minutes and seconds until the timer
reaches 99 minutes and 59 seconds (99:59), then the display will automatically
display minutes up to 9,999.
I. Up/down arrows for set-point control. On/off button starts/stops the time function
www. .com
A.
information@itm.com
EN
8