Replacing The Hygiene Filter - hanseatic EU-KJ700G-H32 Gebrauchsanleitung

Page EN-26 Care and maintenance
Replacing the hygiene
filter
Great Good
Gaseous Pollutant
Great Good
(24)
Hepa Filter
(23)
During the life cycle of the hy-
giene filter, the bars shown on
the lifetime display (23) will go
out one after the other. When
the last bar turns red and the
"Change" (24) display lights up,
you should replace the hygiene
filter.
1. Take off the filter cover (6),
and remove the prefilter (5), as
described in section "Cleaning
the prefilter" on page EN-23.
Med Poor
Med Poor
Pre-Filter
(32)
(4)
2. Remove the hygiene fil-
ter (4). To do so, pull on the
strips (32).
(4)
3. Remove the hygiene filter (4)
from the protective cover.
4. Replace the hygiene filter (4),
the prefilter (5) and the filter
cover (6) as described in sec-
tion "Inserting the filter" on see
page EN-13.