Fan Speed Button; Switching The Appliance On And Off; Setting And Changing The Fan Speed - hanseatic EU-KJ700G-H32 Gebrauchsanleitung

Page EN-20 Operation
As the ambient light level
increases again (e.g. in the
morning), the display reverts to
normal light levels and the fan
speed reverts to its set level.
– When in Turbo mode the fan
power is increased to the max-
imum possible level.
• Touch the Mode button (14)
several times if necessary until
the desired operating mode is
displayed.
The display will show the dif-
ferent operating modes in the
order Auto > Sleep > Turbo.
If you switch to an operat-
ing mode, the previously
selected fan speed setting
is cancelled.
• To switch off the function by
operating mode, touch the fan
speed control button (13).

Fan speed button

You can use the fan speed but-
ton (13) to control the fan speed.
The settings are "Low", "Mid",
and "High".
Switching the appliance
on and off
(15)
Child Lock
（Press 3s）
DIMMER ION Auto Sleep Turbo Child Lock
PM2.5 (UV) SPEED MODE
（Press 3s）
MODE
Outlet
Great Good Med Poor
Gaseous Pollutant
Great Good Med Poor
Hepa Filter Pre-Filter
• To switch the appliance on,
press the On/Off button (15).
A beep will sound. The appli-
ance switches on with the last
set fan speed.
• To switch the appliance off,
press the On/Off button (15)
again.
Setting and changing
the fan speed
To be able to set or
change the fan speed, the
appliance must be turned
on.
1. Switch the appliance on, as
described in Section "Switch-
ing the appliance on and off"
see "Switching the appliance
on and off" on page EN-20).