Dimmer Button; Mode Button - hanseatic EU-KJ700G-H32 Gebrauchsanleitung

ION button
(12)
ION
(UV)
ION
DIMMER
PM2.5 Auto
(UV)
The ION button (12) has two
functions:
– It activates and deactivates
the ION function, which in
turn ionises the air during the
cleaning process, thereby
removing bacteria, dust, cig-
arette smoke, spores, pollen
etc. This is particularly useful
for people with hayfever and
other allergies.
– With the ION button you can
reset the sensors that monitor
the pollution of the filters once
you have replaced or cleaned
the filter.

Dimmer button

You can use the Dimmer but-
ton (10) to adjust the brightness
of the display. You can choose
between the levels Bright, Dark-
ened and Off.
Child Lock
（Press 3s）
Sleep Turbo
MODE
SPEED
Operation Page EN-19
• In order to adjust the bright-
ness of the display, press
the Dimmer button (10). The
brightness changes in the or-
der Bright > Dimmed > Off.
PM 2.5 button
Using the PM 2.5 button (11),
you can display the current PM
2.5 (Fine Dust) value when the
unit is in Sleep mode.
• Press the PM 2.5 button (11).
The PM 2.5 (Fine Dust) value
display will flash for a few sec-
onds and then go off.

Mode button

To be able to activate or
deactivate the operating
mode, the appliance must
be switched on.
The mode button (14) is used to
set various operating modes:
– In Sleep mode, the display is
dimmed and the fan speed is
at its lowest level.
– When in Auto mode, the dis-
play is dimmed and the fan
speed switches to its lowest
level when the light sensor
registers that the ambient light
level is decreasing, such as at
dusk.