Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Article:
Power supply:
Power consumption:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Dimensions:
Weight:
Fitting lamps:
GE CSR575/2 SE 95V/575W GX-9.5 1000h
OMNILUX OSD 95V/575W GX-9.5 2000h 6000K
OSRAM HSR 575/60 95V/575W GX-9.5 1000h
PHILIPS MSR 575/2 95V/575W GX-9.5 1000h
OMNILUX OSR 575/2 95V/575W GX-9.5 1000h
SYLVANIA BA575/2SE NHR 575W GX-9.5 8500K
OMNILUX OSD 95V/575W GX-9.5 1000h 7200K
OSRAM HSR 575/72 95V/575W GX-9.5 1000h
Please note: All information is subject to change without prior notice. 17.01.2017 ©
41600080, 41600082
230 V AC, 50 Hz ~
775 W
:
45° C
a
:
160° C
B
0.5 m
2 m
T 5 A, 250 V
280 x 270 x 430 mm
13 kg
No.
89107000
89107005
89107010
89107015
89107017
89107020
89107205
89107210
18/20
00106260.DOCX, Version 1.1
Werbung
Inhaltsverzeichnis
