Electromagnetic Compatibility; Type E - Grundfos S Serie Montage- Und Betriebsanleitung

Temperature
Operating condition
Storage

Electromagnetic compatibility

• Interference emission: Class B
• Interference immunity: Industrial requirements.

8.4 Type E

Reference conditions: DIN 16086 and DIN EN 60770.
Measuring principle: Piezoresistive sensor with stainless steel separating
membrane.
Pressure transfer means: Synthetic oil.
Admissible load changes: > 10 million, 0 to 100 % measuring range.
Analog output: 4-20 mA, two-wire.
Current burden: R
Protection type: IP68, submersible to 100 m.
Weight: 400 g, without the cable.
Diameter: 25 mm.
Material
Type
Process connection
Measuring membrane
Case
Case, seals
Cable
22
Temperature
0 to 50 °C
The product must not be exposed to frost in the
medium. A restriction may be required depending
on the medium.
-20 to +80 °C, dry
≤ (U
- 10 V) / 0.02 A (Ω).
L B
Material
Stainless steel 316 Ti
Stainless steel 316 L
Stainless steel 316 Ti
FPM
EPDM
PE-LD (P)
FEP (F)
EPR (E)