Motorola PMPN4156 Schnellstartanleitung Seite 8

Table 7: Messages and LED Indications for IMPRES 2™ or IMPRES Battery
Status
Standby (Battery is
waiting to rapid charge)
Table 8: Messages and LED Indications for Other Motorola Solutions Batteries
Status
Charger Powers On
Battery Detected
Rapid Charging
Charged to 90% or more
Charged to 95% or more
Fault
Standby (Battery is
waiting to rapid charge)
PROGRAMMING A RADIO WITH ITM PROXY
Note: Contact your local dealer to order the programming cable (Part Number:
CB000458A07).
6
(Continued)
Charger Display
HOT BATTERY
WAITING TO CHRGE
or
COLD BATTERY
WAITING TO CHRGE
or
VERY LOW BATTERY
WAITING TO CHRGE
Charger Display
IMPRES 2
CHARGER
MOTOROLA
BATTERY
RAPID CHARGE
xxxx0mAh yyy%
TRICKLE CHARGE
xxxx0mAh yyy%
CHARGE COMPLETE
xxxx0mAh yyy%
NOT CHARGEABLE
REMOVE& REINSERT
HOT BATTERY
WAITING TO CHRGE
or
COLD BATTERY
WAITING TO CHRGE
or
VERY LOW BATTERY
WAITING TO CHRGE
LED Indication
Flashing Amber
LED Indication
Green for approximately one second.
Steady Red
Steady Red
Flashing Green
Steady Green
Flashing Red
Flashing Amber