Motorola PMPN4156 Schnellstartanleitung Seite 10

3. Secure the wall bracket in position by installing mounting hardware over the mounting
holes on the wall bracket tightly.
Note: It is recommended to use 10-16x1-1/2" tapping screw and washer (not included) on
wood stud and solid-flat concrete/brick wall.
4. Hang the MUC on wall bracket as shown in Figure 3.
ADDITIONAL FEATURES AND INFORMATION
The complete online user guide is available through publication part number MN003509A01
at https://businessonline.motorolasolutions.com. This guide provides information on
features of the Multi-Unit Charger, including:
• IMPRES 2 Charging Features
• Details regarding charging status and LED indications for various batteries
• Charger Reprogramming
• IMPRES Battery Fleet Management
• Charger Setup Options
- Preparing Lithium-ion Batteries for Shipment
- Long-Term Battery Storage
- Enabling or Disabling Calibration/Reconditioning
- IMPRES Battery End-of-Service Life Indication Selection
- Display Format Selection
- Power Saver Selection
• Battery Analyzer Mode
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or
registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other
trademarks are the property of their respective owners.
© 2017 and 2020 Motorola Solutions, Inc. All rights reserved.
8