Electrical connection
The electrical connections must be made according to the following
instructions in order to ensure safe and error-free operation:
■ Before you connect the device, compare the connection data for
the power supply adapter (voltage and frequency) on the type pla-
te with that of your mains power supply. This data must match to
avoid damage to the device.
■ Keep the cable away from hot surfaces and sharp edges.
■ Make sure not to bend the cable or pull it too tightly.
Installation and connections
For continuous playback, the device can be placed on a fl at surface.
The device can only be set up in the horizontal orientation.
Remove the base from the packaging and screw it into the base
support.
CAUTION
The device can be damaged if it tips over or falls down.
► Make sure that the device cannot tip over.
Connect the connection cable to the socket on the device and
plug in the power supply adapter.
NOTE
► Only use the enclosed power supply adapter.
GB
39